Your Faucet Replacement Best Practices

One of the most common types of DIY projects out there is also, sadly, one of the most irritating. It involves faucet replacement - a problem you probably only realize you have when you're trying to do the dishes or take a shower (also known as the worst possible time).

But luckily, this process isn't nearly as complicated as you might think it is. If you really want to make sure your faucet replacement goes as well as possible, there are a few key best practices you'll want to keep in mind. 

Installation Tips and Tricks

If you really want to make the actual physical act of replacing your faucet as easy as possible, there are a few key things to keep in mind. First, if you're dealing with any loose or corroded nuts or bolts, don't even bother trying to remove them with a wrench. You'll only waste time while making a problem worse. Cut them off with a rotary tool instead. 

Likewise, you'll always want to take care to mount your faucet with silicone to create some type of a seal between the faucet and the sink itself. Not only will this prevent the faucet from moving around over time (which can again spell trouble for your nuts and bolts), but it'll also help prevent water from finding its way UNDER your faucet, which can corrode it and cause you to wind right back up in the same situation sooner rather than later. 

Use Faucet Replacement as an Opportunity

faucet-repair-replacement-indianapolis-indiana.jpg

If you've reached a situation where faucet replacement is now a requirement, it's important for you to see it for what it really is: an opportunity to "trade up," so to speak. Instead of going off to the hardware store and buying the cheapest faucet that you can find, think about upgrading to a high efficiency unit instead.

As per the Environmental Protection Agency's WaterSense Program, any faucet that is labeled "high efficiency" needs to meet a few key characteristics. Not only can it have a maximum flow rate of 1.5 gallons per minute or less (which is a 32% decrease over the current federal standard), it also must be designed for private use only.

While it's certainly true that a high efficiency replacement may cost more than a more traditional alternative (though not as much as you'd think), it's also a great way to save money every month on your utility bills. Over the long-term, this is one investment that will more or less pay for itself. 

Be Mindful of That Finish

Last but not least, one of the most important (and enjoyable) parts of the faucet replacement process involves choosing the finish of the model you're about to install. While it's certainly true that most faucets are actually guaranteed for life, you'll still want to pay close attention to this particular element.

For a lot of people, chrome is a particularly compelling choice because it's both easy to clean and is very resistant to dents and scratches. If you're looking for something a little more colorful and that fits in better with the general decor of your room, an epoxy coating is an ideal solution.

Regardless of the selection you ultimately make in terms of faucet replacement, by this point you have everything you need to make sure that the job gets done properly as quickly as possible.