Any homeowner will tell you that when it comes to plumbing, there are a few common types of issues that tend to rear their ugly heads time and again. One minute you’re preparing a lovely dinner for the whole family. You turn on the sink and suddenly hear a CLANGING noise that just won’t quit. Or you’re about to take a bath and unwind after a hard day at work but your creaky pipes are really killing the mood.
Don’t worry – these are all common problems, yes, but they also have a number of very easy solutions that you can put to good use right away. Here are a few DIY tips you can use for these minor plumbing emergencies.
Battling Loud Sinks
If one of the major issues that you’re dealing with takes the form of a loud sink, don’t worry about it – just head to the hardware store and pick up a can of expanding foam. Clear out the area under your sink so that you can see the bottom side of your sink basins. Spray a coat of the foam in between your basins and cut away any excess foam with a knife. Once the foam expands and dries, this will help absorb the vibrations that were causing all those terrible noises in the first place!
Put an End to Creaky Pipes
If you’re greeted by an awful creaking noise every time you turn on the water, don’t worry about it – the hardware store is again here to help. Head to the store and purchase some adhesive-backed felt, which will probably be found in the plumbing section because it’s so useful. Locate the pipe in your home that is the cause of all that creaking and wrap the pipe with small, specially cut pieces of felt. Then, go back and turn on the water – you’ll be shocked by how silent everything now is!
Say “Goodbye” to that Leaky Faucet
Finally, one of the most common types of small-but-irritating plumbing issues that a lot of homeowners deal with takes the form of the classic leaky faucet – probably a lot of them, in fact. What a lot of people don’t realize is that this actually has a fairly straightforward solution, as most leaky faucets just need new seat washers to be as good as new!
All you have to do is remove the handle, use a wrench to remove the packing nut, remove and replace the seat washer (which you’ll be able to find easily because it’s held in place by a particular type of brass screw) and put everything back together again. All told, this is a problem that you can fix yourself in a couple of minutes – and you’ll start saving money almost immediately on your monthly water bill, too!
These are just a few of the common plumbing problems that most homeowners are likely to face at some point during their lives. As always, if you don’t feel like you can safely or effectively get a particular job done on your own, there is absolutely no shame in calling in the help of a trusted local Indianapolis plumbing professional. After all, this is what they’re there for and the peace-of-mind alone that comes with knowing a problem has been permanently solved is something you just can’t put a price on..